EasyManua.ls Logo

Currie tech IZIP - Power Switches and Fuses

Default Icon
123 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45


The power switch may be located, depending on the model of
bike, in the following locations
• Onthebatterypackitself(STBSeries)
• Onthebacksideoftherackbehindtherearreflector
(RMBSeries2008+)
• Onthefrontsideoftherack,directlybeneathand
behindthesaddle(RTMB2009)
• Onthecontrollerbox(ViaUrbano,RTMB2010)
Be sure to turn the switch off whenever you are not using the
bicycle or when charging the bicycle.
STBBicycles
RMBBicycles(2008+)
RTMBBicycles(2009+)
ViaUrbano
Three-PositionPower
Switch

Bikeswithdualrackmountedbatterypacks(RMB)are
equipped with a three-position power switch. This switch has
two"ON"positionsthatcorrespondtothetwobatterypacks.
Theswitchis"OFF"whenplacedatthecenterposition.
On
(Rightpack)
Off
On
(Leftpack)

Table of Contents

Other manuals for Currie tech IZIP

Related product manuals