Currie tech IZIP - Shifters

58

Tighten the bolts that clamp the shifters and brake
leverstothehandlebarusinga5mmAllenkeyor
Phillipsheadscrewdriver.Thisstepiscompletedatthe
factory, but it should be checked before operating your
bicycle.
(Figure1)HandlebarwithGripShifter.
(Figure2)Topmountedthumbshifter.


!

Shifterbinderbolt
(2.5mmAllenkey)
Brake lever binder bolt (tighten from top side)
(5mmAllenkey)

Shifterbinderbolt
(4mmAllenkey)