(Menu Button) → … → USB transfer
This function opens the USB transfer screen, which allows the operator to transfer data
between the VisiTouch and a USB key.
Copying parameters from USB to NC requests a level 3 password or, for end- users,
the restore password.
For a smooth transfer, please take the following precautions into consideration:
• The USB port of the VisiTouch is meant to be used only with a storage media of the
"Memory stick" type.
• The port is a standard USB 2.0 port, USB 1.1 compatible.
• USB 3.0 key that are USB 2.0 compatible, should normally work. There’s however
no guarantee, as it depends of the firmware of these new keys.
• CD and external HDD are not accepted.
• Although unlikely, it is possible to find a USB key that is not compatible with the
VisiTouch. If so, try with another one.
3 rules for a fast and easy transfer:
➢ Use a USB key dedicated to files transfer with the VisiTouch.
➢ Less files means a faster transfer.
➢ The file’s path on the key is limited to 255 characters.
PC VisiTouch is the offline software which has the same features as the controller. It is
possible to transfer parts or tools from one to another.
PC VisiTouch is available as an option, please contact the machine manufacturer if
you would like to purchase it.
To Next Page
Loading...
Need help?
General
