5. Press the Program name.
6. Press Batch …
7. Press New Batch
8. Add into the Batch all programs or groups you need in the production series
9. Press the desired Batch mode by pressing in the image:
• A suite of groups
• A suite of programs (
10. Press menu and select Save Batch as … And use keyboard to write the name of
the group (here: Product Batch)
11. Press once the Batch have been saved and you will come back to the Bend
Numerical page and start the series production.
12. A yellow pop-up will inform you about the part loaded and Quantity requested
13. The program name will be substituted with the Batch Name and the actual
program name in production.
14. For quit the Batch select program Name (Here: Product Batch)
15. Press Batch…
16. Press Review Batch
17. Press to quit the Batch mode.
To Next Page
Loading...
