D-Link DAP-2230 User Manual

10D-Link DAP-2230 User Manual
Section 2 - Installation
A power adapter is included with some DAP-2230 models.
1. Connect an Ethernet cable from your network device to the LAN(PoE) port on the DAP-2230.
2. Connect the supplied power adapter to the DC IN connector on the DAP-2230.
3. Plug the power adapter into a power outlet.
Method 3 - DC Adapter
DAP-2230
Switch or Router
PC
Power Adapter

D-Link DAP-2230 Specifications

General

Frequency Band	2.4 GHz
Maximum Data Rate	300 Mbps
Wireless Standards	IEEE 802.11n
Ethernet Ports	1 x 10/100 Ethernet
PoE Support	Yes (802.3af)
Operating Modes	Access Point, WDS, Client
Wireless Security	WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise
Power Supply	12V DC or PoE