D-Link DAP-2230 - Auto-RF

47D-Link DAP-2230 User Manual
Section 3 - Conguration
Auto-RF
In this window, users can view and congure the automatic radio frequency settings as well as congure the auto-initiate
period and threshold values. Click the Save button to accept the changes made.
Enable:
Auto-RF:
Select to Enable or Disable the auto-RF feature here.
Initiate
Auto-RF:
Click the Auto-RF Optimize button to initiate the auto-RF optimization
feature.
Auto-Initiate: Select the Enable or Disable the auto-initiate feature here.
Auto-Initiate
Period:
After enabling the auto-initiate option, the auto-initiate period value can
be entered here. This value must be between 1 and 24 hours.
RSSI
Threshold:
Select the RSSI threshold value here. This value is listed in the drop-down
menu in increments of 10% from 10% to 100%.
RF Report
Frequency:
Enter the RF report frequency value here.