34D-Link DAP-2230 User Manual
Section 3 - Conguration
The device supports up to four multiple Service Set Identiers. In the Basic > Wireless section, you can set the Primary SSID.
The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to
establish a new wireless network.
Multi-SSID
Enable
Multi-SSID:
Check to enable support for multiple SSIDs.
Band: This read-only value is the current band setting.
Index: You can select up to three multi-SSIDs. With the Primary SSID, you have a
total of four multi-SSIDs.
SSID Service Set Identier (SSID) is the name designated for a specic wireless
local area network (WLAN). The SSID’s factory default setting is dlink. The
SSID can be easily changed to connect to an existing wireless network or
to establish a new wireless network.
SSID
Visibility:
Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
across the network, thus making it visible to all network users.
Security: The Multi-SSID security can be Open System, WPA-Personal, WPA-
Enterprise, or 802.1x. For a detailed description of the Open System
parameters, please go to page 26. For a detailed description of the WPA-
Personal parameters, please go to page 27. For a detailed description
of the WPA-Enterprise parameters, please go to page 28. For a detailed
description of the 802.1x parameters, please go to page 29.
Priority: Check the Enable Priority box at the top of this window to enable. Select
the priority from the drop-down menu.
WMM (Wi-Fi
Multimedia):
Select Enable or Disable.
To Next Page
Loading...
Need help?
General
