D-Link DAP-2230 - Ldap

53D-Link DAP-2230 User Manual
Section 3 - Conguration
After selecting LDAP as the Authentication Type, administrators can congure the LDAP authentication settings required to
join the network.
Session
timeout
(1-1440):
Enter the session timeout value here. This value can be from 1 to 1440
minutes. By default, this value is 60 minutes.
Band: Select 2.4 Ghz.
SSID Index: Select the SSID for this Authentication.
Authentication
Type:
Select the captive portal encryption type here. Options to choose from are
Web Redirection, Username/Password, Passcode, Remote RADIUS, LDAP
and POP3.
Web
Redirection
State:
By default web redirection is disabled. Select enable to activate the website
redirection feature.
URL Path : Select whether to use either HTTP or HTTPS here. After selecting either
http:// or https://, enter the URL of the website that will be used in the space
provided.
Server: Enter the LDAP server’s IP address or domain name here.
Port: Enter the LDAP server’s port number here.
Authenticate
Mode:
Select the authentication mode here. Options to choose from are Simple and TLS.
Username: Enter the LDAP server account’s username here.
Password: Enter the LDAP server account’s password here.
LDAP