D-Link DAP-2230

14D-Link DAP-2230 User Manual
Section 3 - Conguration
Conguration
This section will show you how to congure your new D-Link Wireless N PoE Access Point using the web-based conguration
utility.
Web-based Conguration Utility
If you wish to change the default settings or optimise the
performance of the DAP-2230, you may use the web-
based conguration utility.
To access the conguration utility, open a web browser
such as Internet Explorer and enter http://192.168.0.50
Type admin and then enter your password. Leave the
password blank by default.
If you get a Page Cannot be Displayed error, please refer
to “Troubleshooting” on page 104 for assistance.