D-Link DAP-2230 - QoS

65D-Link DAP-2230 User Manual
Section 3 - Conguration
QoS
Quality of Service (QoS) enhances the experience of using a network by prioritizing the trac of dierent applications. A QoS
Rule identies a specic message ow and assigns a priority to that ow. For most applications, the priority classiers ensure
the right priorities and specic QoS Rules are not required. QoS supports overlapping rules. If more than one rule matches a
specic message ow, the rule with the highest priority will be used.
QoS
(Quality of
Service):
Enable this option if you want to allow QoS to prioritize your trac Priority
Classiers.
HTTP: Allows the access point to recognize HTTP transfers for many common audio
and video streams and prioritize them above other trac. Such streams are
frequently used by digital media players.
Automatic: When enabled, this option causes the access point to automatically attempt
to prioritize trac streams that it does not otherwise recognize, based on
the behavior that the streams exhibit. This acts to de-prioritize streams
that exhibit bulk transfer characteristics, such as le transfers, while leaving
interactive trac, such as gaming or VoIP, running at a normal priority.