D-Link DAP-2230 User Manual

33D-Link DAP-2230 User Manual
Section 3 - Conguration
RSSI
Threshold:
When RSSI is selected in the Aging out drop-down menu, select the per-
centage of RSSI here. When the RSSI of wireless clients is lower than the
specied percentage, the device disconnects the wireless clients.
Data Rate
Threshold:
When Data Rate is selected in the Aging out drop-down menu, select
the threshold of data rate here. When the data rate of wireless clients is
lower than the specied number, the device disconnects the wireless
clients.
ACL RSSI: Use the drop-down menu to Enable the function. When enabled, the de-
vice denies the connection request from the wireless clients with the RSSI
lower than the specied threshold below.
ACL RSSI
Threshold:
Set the ACL RSSI Threshold.

D-Link DAP-2230 Specifications

General

Frequency Band	2.4 GHz
Maximum Data Rate	300 Mbps
Wireless Standards	IEEE 802.11n
Ethernet Ports	1 x 10/100 Ethernet
PoE Support	Yes (802.3af)
Operating Modes	Access Point, WDS, Client
Wireless Security	WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise
Power Supply	12V DC or PoE