Key Exchange Method:
The key exchange method for the IPSec tunnel. This can be Auto(IKE) or Manual. The default is Auto(IKE).
Choosing these options displays other options on the page, and these are documented below.
Authentication Method:
The authentication method for the IPSec tunnel.
This can be Pre-Shared Key or Certificate (X.509). The default is Pre-Shared Key.
Choosing these options displays other options on the page, and these are documented below.
Perfect Forward Secrecy:
Whether to enable or disable perfect forward secrecy.
Tick this to enable perfect forward secrecy, and untick it to disable it. The default is un-ticked.
Advanced IKE Settings: Click Show Advanced Settings to show advanced Auto(IKE) settings.
Choosing this option displays other options on the page, and these are documented below.
Phase 1 Mode: The Auto(IKE) mode to use with the IPSec tunnel. This can be Main or Aggressive. The default is Main.
Encryption Algorithm: The encryption algorithm to use with the IPSec tunnel.
This can be DES, 3DES, AES. The default is DES.
To Next Page
Loading...
