Wireless Advanced Configuration 5GHz
This allows you to set wireless settings for the 5 GHz wireless band.
Wireless Advanced Configuration 5GHz
Mode: The wireless mode. This can be 802.11a/n/ac, 802.11ac, 802.11n, or 802.11a.
Choosing the 802.11a/n/ac, 802.11ac, or 802.11n option displays other options on the
page, and these are documented below.
Rate: The rate at which to transmit and receive on. This can be Auto, MCS0, MCS1, MCS2,
MCS3, MCS4, MCS5, MCS6, MCS7, MCS8, MCS9, MCS10, MCS11, MCS12, MCS13, MCS14,
MCS15, or MCS32. The default is Auto.
Rx Chain Power Save: The RX Chain Power Save feature turns one of the receive chains off
to save power.
TX Power: The transmit power of the wireless radio. This can be 100%, 80%, 50%, 30%, or
10%. The default is 100%.
Choose Country: Default is ZA
Channel: The channel to operate on. This can be Auto, 52, 56, 60, 64, 149, 153,
157, 161, or 165. The default is Auto.
Current Channel: This displays the current channel that the wireless radio is operating on.
To Next Page
Loading...
