L2TP LNS Tunnel Settings
Connection Name: The connection name for the L2TP tunnel.
Enable: Whether to enable or disable the L2TP tunnel. Tick this to enable the L2TP tunnel.
The default is un-ticked.
Tunnel Name: The tunnel name for the L2TP tunnel.
Tunnel Interface IP: The IP address to listen on for the L2TP tunnel.
Tunnel LAC IP: The starting IP address for the DHCP table range.
Authentication Type: The Authentication type for the LNS tunnel.
Access Lac: Whether to enable or disable access to the LAC.
Tick this to enable access. The default is un-ticked.
Click Apply to apply the settings and click Refresh to refresh the page.
L2TP LNS User List
Number: The LNS user number.
User Name: The username of the LNS user.
Password: The LNS user's password.
Action: Press to remove/edit the LNS user.
User Name: Enter the User Name of a new LNS user.
Password: Enter the Password of a new LNS user.
Click Add to add a new LNS user.
To Next Page
Loading...
