D-Link DWR-956M - Basic Call Control; CID

Basic Call Control
Here youcan modify the timers for the DWR-956M incoming and outgoing calls.
Short Timer: Modify the short timer value for pre-dialing timeout.
Long Timer: Modify the long timer value for post-dialing timeout.
Dial Tone Timer: Modify the dail tone timer before timeout.
Ring Without Answer Timer: Modify the time before the call is hungup.
Howl Tone Timer: Modify the Howl timer value.
Busy Tone Timer: Modify the Busy Tone timer timeout while busy tone is played.
Country Tone: Change the Country dial tone.
Connection 1
Flash Min: Change the flash timer minimum value.
Flash Max: Change the flash timer maximum value.
Click Apply to apply the settings and click Refresh to refresh the page.
CID
Here you can select which mode to use for Caller Identity.
CID Mode: Choose between FSK or DTMF
Click Apply to apply the settings and click Refresh to refresh the page.