Connect a Wireless Client to your Router
WPS Button
The easiest way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless
adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you
can press to connect to the DWR-956M router. Please refer to your user manual for the wireless device you want to connect to make sure you
understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DWR-956M for about 1 second. The WPS LED on the front will start to blink.
Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the WPS LED stops blinking, you will be connected and your wireless
connection will be encrypted with WPA2.
To Next Page
Loading...
