Wireless Security Setting
This allows you to set the security settings for the wireless network.
Wireless Security Setting
Choose SSID: The SSID that you wish to modify. This can be from SSID1 to SSID8. SSID 1-4 is
for 2.4GHz and SSID 5-8 is for 5GHz.
Authentication: The authentication type to use with the SSID.
This can be None, WEP, WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK MIXED, or 802.1X.
Choosing the WEP, WPA-PSK, WPA2-PSK, WPA-PSK/ WPA2-PSK MIXED, or 802.1X option
displays other options on the page, and these are documented below.
WPA Preshare key: This is the pre-shared key that clients authenticating with WPA will need
to supply in order to connect to the SSID.
Encryption Mode: The encryption mode for the SSID. This can be AES, TKIP or TKIP+AES.
Authentication: WEP Encryption Mode: The encryption mode for the SSID. This can be Open,
Share, or Both.
Encryption Length: The length of the encryption key for the SSID.
This can be 4 bits (10 hex digits) or 128 bits (26 hex digits).
Key Index: The default key to use for authentication. The keys are numbered 1 to 4
and are listed below.
Key1: Authentication key 1. The SSID simultaneously supports up to 4 keys.
Key2: Authentication key 2. The SSID simultaneously supports up to 4 keys.
Key3: Authentication key 3. The SSID simultaneously supports up to 4 keys.
Key4: Authentication key 4. The SSID simultaneously supports up to 4 keys.
Authentication: 802.1X
Radius Server Address: The RADIUS server IP address to use for authentication.
Radius Server Port: The RADIUS server port to use for authentication.
Radius Server Key: The RADIUS server key to use for authentication.
Click Apply to apply the settings and click Refresh to refresh the page.
To Next Page
Loading...
