VPN Lite
VPN Lite Configuration
Connection Name: The connection name for the L2TP tunnel.
Enable: Whether to enable or disable VPN Lite. Tick this to enable the
VPN Lite. The default is un-ticked.
User Name: The user name for the VPN Lite Configuration.
Password: The password for the VPN Lite Configuration.
Site LAN IP/ Netmask: The IP addres of the LAN or netmask.
NAT: Whether to enable or disable Network Address Translation.
Tick this to enable NAT. The default is un-ticked.
Firewall: Whether to enable or disable a firewall.
Tick this to enable a firewall. The default is un-ticked.
Click Apply to apply the settings and click Refresh to refresh the page.
Static Route List
Number: The number of the static route in the list (ascending order).
Destination Subnet: The IP address for the destination subnet.
Mask: The IP address for the mask.
Action: Press the icon to delete a static route from the list.
To Next Page
Loading...
Need help?
General
