WPS Settings 2.4GHz
This allows you to set Wi-Fi Protected Setup (WPS) settings for the 2.4 GHz wireless band.
WPS Settings 2.4GHz
Enable WPS: Whether to enable or disable WPS for the 2.4 GHz wireless band. Tick this to
enable WPS. The default is ticked. Choosing this option displays other options on the page, and
these are documented below.
Choose AP Role: The WPS AP role. This can be Registrar or Enrollee. Choose Registrar for the
router to act as the WPS server, and choose Enrollee for the router to act as the WPS client.
Choosing these options displays other options on the page, and these are documented below.
Press WPS Button: Press the physical WPS button on the router or the PBC button to initiate the
WPS procedure.
Input PIN Number: The PIN required to join the wireless network.
Negotiation Status: The status of the WPS process.
Choose AP Role: Enrollee
Current PIN: The PIN required to join the wireless network. Click Generate New PIN to generate a new PIN.
Session Status: The status of the WPS process.
Click Apply to apply the settings and click Refresh to refresh the page.
To Next Page
Loading...
