Wireless
Wireless Basic Configuration 2.4GHz
The Wireless menu is used to set 2.4 Ghz, 5 Ghz, and wireless security settings on the DWR-956M.
This allows you to set the wireless network settings for the 2.4 GHz band.
Wireless Basic Configuration 2.4GHz
Enable Wireless: Whether to use enable or disable the 2.4GHz Wi-Fi. Tick this to enable.
This default is ticked.
Choose SSID: The SSID that you wish to modify. This can be from SSID1 to SSID4.
Enable SSID: Whether to use enable or disable the SSID. Tick this to enable the SSID. This
default is ticked.
Enable Isolation: Whether to enable or disable station isolation. This prevents wireless
clients on the same SSID from communicating with each other. Tick this to enable
isolation. This default is un-ticked.
Hide SSID: Whether to hide or broadcast the SSID. Tick this to hide the SSID. This default
is un-ticked.
SSID: The SSID name. Enter the name of the SSID as you want to be displayed in the
router web interface and to clients.
BSSID: The Basic Service Set Identifier (BSSID) of the router. This is the MAC address of
the wireless interface.
Click Apply to apply the settings and click Refresh to refresh the page.
To Next Page
Loading...
