Dynamic Route
This allows you to set up dynamic routes to define how to route traffic for remote networks.
Click Add to add a new dynamic route.
Dynamic Route Setting
This allows you to set up dynamic routes to define how to route traffic for remote networks.
Dynamic Route Setting
Connection Name: The connection name for the static route.
Enable: Whether to enable or disable dynamic routing.
Tick this to enable dynamic routing.
Protocol: The dynamic routing protocol. This can be RIPv1, RIPv2, OSPF, or BGP.
Choosing the RIPv1, RIPv2, or BGP option displays other options on the page,
and these are documented below.
Click Back to go back to the previous page, click Apply to apply the settings
and click Refresh to refresh the page.
IPv6 Static Route
This allows you to set up static IPv6 routes to define
how to route traffic for remote networks.
Click Add to add a new static route.
To Next Page
Loading...
