xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
126
config vlan
Purpose
Used to add additional ports to a previously configured VLAN, and enable or disable the
VLAN advertisement.
Syntax config vlan <vlan_name 32> { [ add [ tagged | untagged | forbidden ] | delete ]
<portlist> | advertisement [ enable | disable]}(1)
Description
This command allows the user to add ports to the port list of a previously configured VLAN,
and enable or disable the VLAN advertisement. The user can specify the additional ports as
tagging, untagging, or forbidden. The default is to assign the ports as untagging.
Parameters
<vlan_name 32> − The name of the VLAN to which to add ports.
add − Entering the add parameter will add ports to the VLAN. There are three types of ports
to add:
• tagged − Specifies the additional ports as tagged.
• untagged − Specifies the additional ports as untagged.
• forbidden − Specifies the additional ports as forbidden
delete − Deletes ports from the specified VLAN.
<portlist> − A port or range of ports to add to, or delete from the specified VLAN.
advertisement [enable | disable] − Enables or disables GVRP on the specified VLAN.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To add 4 through 8 as tagged ports to the VLAN v1:
To Next Page
Loading...
Need help?
General