xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
162
To show IP–MAC–Port Binding global configuration:
DES-3528:admin#show address_binding
Command: show address_binding
Trap/Log : Disabled
DHCP Snoop(IPv4) : Disabled
DHCP Snoop(IPv6) : Disabled
ND Snoop : Disabled
To show IP–MAC–Port Binding configuration of port 1:
DES-3528:admin#show address_binding ports 1
Command: show address_binding ports 1
Port IPv4 IPv6 Mode Zero IP DHCP Packet Stop Learning
State State Threshold/Mode
----- -------- -------- ---- --------- ----------- --------------
1 Disabled Disabled ARP Not Allow Forward 500/Normal
show address_binding blocked
Purpose
This command is used to display the IP–MAC–Port Binding blocked entries.
Syntax show address_binding blocked [all | vlan_name <vlan_name> mac_address
<macaddr>]
Description
This command is used to display the IP–MAC–Port Binding blocked entries.
Parameters blocked - Specifies the addresses in the database that the system has auto learned and
blocked.
vlan_name - Specifies the name of the VLAN to which the blocked MAC address belongs.
mac_address - Specifies the MAC address of the entry or the blocked MAC address.
Restrictions
None.
Example usage:
To show IP–MAC–Port Binding blocked MAC entries:
DES-3528:admin# show address_binding blocked all
Command: show address_binding blocked all
VID VLAN Name MAC Address Port
---- -------------------------------- ----------------- ----
1 default 00-05-5D-0B-AD-A5 1
1 default 00-05-5D-65-76-60 1
1 default 00-0F-EA-13-4F-4A 1
1 default 00-15-E9-85-BD-3F 1
1 default 00-16-36-8A-42-CB 1
1 default 00-16-76-33-FC-88 1
1 default 00-1A-4D-65-FE-A5 1
1 default 00-1B-11-C8-55-CB 1
Total Entries : 8