D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
442
State : Enable
Method : Local
Authentication Failover : Disabled
Redirect Path :
Virtual IP : 0.0.0.0
Switch HTTP Port : 80 (HTTP)
RADIUS Authorization : Enabled
Local Authorization : Enabled
DES-3528:admin#
show wac ports
Purpose
Used to display WAC authentication settings.
Syntax show wac ports {<portlist>}
Description
This command allows you to display the Web authentication settings.
Parameters
ports − A range of member ports to show the status.
<portlist> - (Optional) Enter a list of ports used here.
Restrictions
None.
Example usage:
To display WAC ports:
DES-3528:admin# show wac ports 1-8
Command: show wac ports 1:1-1:8
Port State Aging Time Idle Time Block Time
(Minutes) (Minutes) (Seconds)
----- -------- ------------- ------------- -------------
1:1 Enabled 1440 Infinite 60
1:2 Enabled 1440 Infinite 60
1:3 Enabled 1440 Infinite 60
1:4 Enabled 1440 Infinite 60
1:5 Enabled 1440 Infinite 60
1:6 Enabled 1440 Infinite 60
1:7 Enabled 1440 Infinite 60
1:8 Enabled 1440 Infinite 60
DES-3528:admin#
show wac user
Purpose
Used to display the user account for Web authentication.
Syntax show wac user
Description
This command allows you to show Web authentication account.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To show Web authentication accounts:
DES-3528:admin# show wac user
Command: show wac user
Username Password VID
----------------- ----------------- ---------
123 123 1
Total Entries:1

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English