xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
441
create wac user
Purpose
Used to create local user accountd for Web-based Access Control.
Syntax create wac user <username 15>{[vlan <vlan_name 32> | vlanid <vlanid 1-4094>]}
Description
This command allows you to create local user accounts for Web-based Access Control.
This user account is independent with login user acoount.
Parameters
username − User account for Web-based Access Control
vlan − Authentication vlan name.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To create a WAC account:
DES-3528:admin# create wac user 123 vlan default
Command: create wac user 123 vlan default
Enter a case-sensitive new password:***
Enter the new password again for confirmation:***
Success.
delete wac user
Purpose
Used to delete the account for Web-based Access Control.
Syntax delete wac user [user <username 15> | all_user]
Description
This command allows you to delete an account.
Parameters
username − User account for Web-based Access Control.
all_users – To delete all the users.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a WAC account:
DES-3528:admin# delete wac user 123
Command: delete wac user 123
Success.
show wac
Purpose
Used to display WAC authentication settings.
Syntax show wac
Description
This command allows you to display the Web authentication settings.
Parameters
ports − A range of member ports to show the status.
all – Will show the status of all the member ports.
Restrictions
None.
Example usage:
To display the WAC state:
Command: show wac
Web-Base Access Control
-------------------------------
To Next Page
Loading...
