D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
77
To the Syslog function on the Switch:
DES-3528:admin# enable syslog
Command: enable syslog
Success.
DES-3528:admin#
disable syslog
Purpose
Used to disable the syslog sending messages.
Syntax disable syslog
Description
This command disables the system log to be sent to a remote host.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the syslog function on the Switch:
DES-3528:admin# disable syslog
Command: disable syslog
Success.
DES-3528:admin#
show syslog
Purpose
Used to display the syslog protocol status as enabled or disabled.
Syntax show syslog
Description
This command displays the syslog status as enabled or disabled.
Parameters
None.
Restrictions
None.
Example usage:
To display the current status of the syslog function:
DES-3528:admin# show syslog
Command: show syslog
Syslog Global State: Enabled
DES-3528:admin#