Dahua ESS2016X - Host Specifications; Ess2016 X

ESS Series User’s Manual
14
SN
Port
Function
1
Fan
It is for case ventilation.
2
Power port
Connect to AC power supplying source.
3
Main control module
It is about all kinds of ports and indictor light
introduction. Please refer to the following sheet.
4
Battery&fan box
It is to install the battery and the case ventilation.
You can refer to the following sheet for detailed information of main control module.
Port/Indicator
Light
Function
LAN1～LAN4
1000Mbps data Ethernet port. It is to transmit data.
10G_1, 10G_2
10000Mbps data Ethernet port. It is to transmit data. (Optional)
WEB port
Ethernet Management port. Login Web via this port.
USB port
USB port
PORT1/PORT2
Connect to the IN port of the disk array enclosure.
CONSOLE
COM port. It is to debug the device and view the login command interface.
RUN
The light is flashing after system booted up and begins running.
M/S
Main control indictor light.
 The light is on if it is the main controller.
 The light is off if it is the slave controller.
ERR
System error indictor light.
 The error light is on when system is abnormal.
 The error light is off when system is running properly.
CACHE
It is reserved for future use.
RST
Press it for 5 seconds to restore default setup (network setup, user password,
time sync, email alarm and etc.).
1.9 Host Specifications
1.9.1 ESS2016X
Model
ESS2016X
System
Main
processer
Multiple-core special storage CPU
OS
Embedded LINUX OS
Power Mode
Single power supplying mode
Fan
Redundant dual ball bearing fan
MTBF>100 thousand hours
Motherboard
Server(Support 7x24H work)
Storage
Default 4G
Case
Self-developed case,
1.2mm extra-thickness hot-dip galvanized steel.
Self-developed patent removable HDD bracket.
Setup
Interface
WEB GUI
Storage
Protocol
Storage
Protocol
iSCSI/ NFS/CIFS/SAMBA/FTP
Video
Capacity
Input Video
128-channel: 2Mbps
Data
Management
HDD No.
16 HDDs.
Support SAS/SATA HDD.