Dahua ESS2016X - RAID Configuration

ESS Series User’s Manual
49
Figure 3-22
3.4.2 RAID Configuration
Click RAID button, you can see an interface is shown as in Figure 3-23.
If the logged in account is ordinary user, you can only view the RAID information.
If the logged in account is administrator, you can view/edit/delete/add RAID group.
Status
Note
clean
The RAID group has completed the synchronization.
degraded
The RAID group is degrading now.
recovering
The RAID group is recovering now. You can view recovering
capacity percentage and synchronization speed on the [].
resyncing
The RAID group is synchronizing now. You can view recovering
capacity percentage and synchronization speed on the [].
Do not use when RAID group is synchronizing. That is to say,
do not create storage pool and share directory.
inactive
Current RAID device is null.
active
Current RAID device is available.
Tips
Go to Appendix A for detailed RAID information.