ESS Series User’s Manual
The interface is shown as in Figure 3-45.
Here you need to configure the following items when you adding iSCSI share.
Target (mapping) name: it is a part of iSCSI share device name. It is easy for you to
recognize the iSCSI device.
Logic volume: It is to set the shared user volume when you create the iSCSI.
Block size: It is to set the shared storage space size.
Cache type: There are two options: write-back, write-through. You can refer to the contents
at the bottom of the interface for detailed information.
Target: Select host/disk array enclosure from the dropdown list.
Figure 3-45
3.6.1.2 Delete iSCSI
In iSCSI main interface (See Figure 3-45), you can select an iSCSI share device and then click
delete button.
3.6.2 Target
Note
The dual-controller host does not support this function.
Here you can view and edit the information of the target object. See Figure 3-46.
To Next Page
Loading...