Dahua ESS2016X - Pool Configuration

ESS Series User’s Manual
52
Figure 3-25
3.4.2.4 Forced Assembly
When the device boots up, there is no RAID. You can see “Inactive” status on the Web. You can
click the Forced Assembly button to form a group.
3.4.2.5 Enable/Disable Positioning Light
Click , select Enable/Disable Positioning Light, you can turn on or turn off the indicator light of
corresponding disk(s) of the RAID group.
3.4.3 Pool Configuration
After you logged in the system as the administrator and go to the Pool interface, you can see the
following interface. See Figure 3-26.
Here you can view the following information:
 Pool name
 Member device.
 Total space (G)
 Used space.
 Disk array enclosure
 Edit
 Delete