ESS Series User’s Manual
Figure 3-49
3.7.1.2 Fix share directory
If the share directory description is shown as “File system mount failed”, you can click the fix
button to fix the share directory.
3.7.1.3 Delete share directory
In share configuration interface, select the item from the share list and then click corresponding
delete button. The folder will be deleted permanently.
3.7.2 FTP Configuration
Login as the administrator, click FTP configuration, the interface is shown as in Figure 3-50.
Here you can view FTP configuration information. You can set FTP share directory, delete FTP
share directory.
In Figure 3-50, you can see the following information:
Transmission speed (unit: KB): It is the max transmission speed of the FTP share. If the
speed is 1000KB, it means the transmission speed of each connection shall be less than
1000KB. When transmission speed is 0KB, it stands for there is no transmission limit.
Connection amount of each IP: The max FTP access amount of each user (By IP address).
Total connection amount: The max FTP access amount of all users (By IP address).
To Next Page
Loading...
General