Instruction SiEBE18-526
190 System Configuration
90˚
55˚
7m
55˚
7m
“INTELLIGENT EYE” is useful for Energy Saving
Energy saving operation
•
Change the temperature –2
°
C in heating / +2
°
C in cooling / +1
°
C in dry mode from set temperature.
•
Decrease the air flow rate slightly in fan operation. (In FAN mode only)
Notes on “INTELLIGENT EYE”
CAUTION
• Application range isas follows.
• Sensor may not detect moving objects further than 7m away. (Check the application range)
• Sensor detection sensitivity changesaccording to indoor unit location, the speed of
passersby, temperature range, etc.
• The sensor also mistakenly detects pets, sunlight, fluttering curtainsand light reflected off
of mirrorsas passersby.
• INTELLIGENT EYE operation will not go on d
uring powerful operation.
• Night set mode will not go on during youuse INTELLIGENTEYE operation.
Vertical angle 90°
(Side View)
Horizontal angle 110°
(Top View)
• Do not place large objects near the sensor.
Also keep heating units or humidifiers outside the sensor’s detection area. Thissensor can
detect objects it shouldn’t as well as not detect objects it should.
• Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and
malfunction.
To Next Page
Loading...
Need help?
General