Instruction SiEBE18-526
182 System Configuration
2.2.9 ECONO Operation
TEMP
ON/OFF
POWERFUL
MODE
FA N
SWING
SILENT
SENSOR
ECONO
COMFORT
TIMER
ON
CANCEL
OFF
1, 2
ECONO Operation
ECONO operation isa function which enables efficient operation by lowering the maximum power
consumption value.
To start ECONO operation
To cancel ECONO
operation
2. Press “ECONO button” again.
1. Press “ECONO button”.
• “” is displayed on the LCD.
• “” disappears from the LCD.
NOTE
• ECONO Operation can only be set when the unit is running. Pressing the operation stop
button causes the settings to be canceled, and the “” disappears from the LCD.
• ECONO operation isa function which enables efficient operation by limiting the power
consumption of the outdoor unit (operating frequency).
• ECONO operation functions in AUTO, COOL, DRY, and HEAT modes. The fan strength
does not change in ECONO operation.
• POWERFUL operation and ECONO operation ca
nnot be used at the same time.
Priority is given to POWERFUL operation.
• Power consumption may not drop even if ECONO operation isused, when the level of
power consumption isalready low.
To Next Page
Loading...
Need help?
General