SiEBE18-526 Troubleshooting for SkyAir Indoor Unit
Troubleshooting 275
5.6 Swing Flap Motor Malfunction / Lock
Remote
Controller
Display
A7
Applicable
Models
FHQ-BU
Method of
Malfunction
Detection
Utilizes ON/OFF of the limit switch when the motor turns.
Malfunction
Decision
Conditions
When ON/OFF of the microswitch for positioning cannot be reversed even though the swing flap
motor is energized for a specified amount of time (about 30 seconds).
Supposed
Causes
Failure of motor
Failure of microswitch
Failure of connector connection
Failure of indoor unit PCB
To Next Page
Loading...
Need help?
General