Instruction SiEBE18-526
180 System Configuration
2.2.7 POWERFUL Operation
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FA N
SWING
SILENT
SENSOR
ON
CANCEL
OFF
ON
1, 2
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling
(heating) effect in any operation mode. You can get the
maximum capacity .
To start POWERFUL
operation
To cancel POWERFUL
operation
2. Press “POWERFUL button”
again.
1. Press “POWERFUL button”.
• POWERFUL operation ends in 20 minutes.
Then the system automatically operates
again with the settings which were used
before POWERFUL operation.
• When using POWERFUL operation, there
are some functions which are not
available.
NOTE
Notes on POWERFUL operation
• In COOL and HEAT mode
To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased
and the air flow rate be fixed to the maximum setting.
The temperature and air flow settingsare not variable.
• In DRY mode
The temperature setting is lowered by 2.5ºC and the air flow rate isslightly increased.
• In FAN mode
The air flow rate is fixed to the maximum setting.
• When using priority-room setting
See
“Note for multi system”
To Next Page
Loading...
Need help?
General