SiEBE18-526 Service Check Function
Troubleshooting 249
2.3 SkyAir Indoor Unit Wired Remote Controller
Explanation If operation stops due to malfunction, the remote controller’s operation LED blinks, and
malfunction code is displayed. (Even if stop operation is carried out, malfunction contents are
displayed when the inspection mode is entered.) The malfunction code enables you to tell what
kind of malfunction caused operation to stop. See page 253 for malfunction code and
malfunction contents.
Operation lamp
Inspection display
Malfunction code
Indoor unit No. in which
a malfunction occurs
(S2001)
To Next Page
Loading...
