SiEBE18-526 Instruction
System Configuration 183
2.2.10 HOME LEAVE Operation
Cooling
25°C
25°C
Heating
C
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FAN
SWING
SILENT
SENSOR
ON
CANCEL
OFF
1, 2
ON
OFF
HOME LEAVE Operation
HOME LEAVE operation isa function which a llows you to record your preferred temperature and air
flow rate settings.
To start HOME LEAVE
operation
To cancel HOME LEAVE
operation
2. Press “HOME LEAVE button” again.
1. Press “HOME LEAVE button” .
• The HOME LEAVE lamp lightsup.
• The HOME LEAVE lamp goes off.
Before using HOME LEAVE operation.
To set the temperature and air flow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and air flow
rate for HOME LEAVE operation. Record your preferred temperature and air flow rate.
1. Press “HOME LEAVE button”. Make sure “ ” is displayed in the remote control
display.
2. Adjust the set temperature with “ ” or “ ” as you like.
3. Adjust the air flow rate with “FAN” setting button as you like.
Home leave operation will run with these settings the next time youuse this function. To change
the recorded information, repeat steps 1 – 3.
Selectable rangeInitial setting
AUTO
AUTO
18-32°C
10-30°C
5 step, AUTO and SILENT
5 step, AUTO and SILENT
temperature temperature Air flow rateAir flow rate
To Next Page
Loading...
Need help?
General