Instruction SiEBE18-526
208 System Configuration
FVXS25/35/50B
PUS H
Care and Cleaning
CAUTION
Before cleaning, be sure to stop the operation and
turn the breaker OFF.
Units
Indoor unit, Outdoor unit and Remote control
Front grille
1. Wipe them with dry soft cloth.
1. Open the front grille.
•
Press the two places on the left and right of
the front grille.
2. Remove the front grille.
•
Remove the chain.
•
Allowing the grille to fall forward will enable you to
remove it.
3. Clean the front grille
•
Wipe softly with a damp cloth.
•
Only neutral detergent may be used.
•
In case of washing the grille with water, dry it with
cloth, dry it up in the shade after washing.
4. Attach the front grille.
•
Insert the front grille into the grooves of the unit
(3 places).
•
Attach the chain to the right, inner-side of the front
grille.
•
Close the grille slowly.
Chain
Place front grille in grooves.
CAUTION
•
Hold the front grille firmly so that it does not fall.
•
Do not touch the metal parts on the inside of the indoor unit, as it may result in injury.
•
When removing or attaching the front grille, use a robust and stable stool and watch your steps carefully.
•
When removing or attaching the front grille, support the grille securely with hand to prevent it from falling.
•
For cleaning, do not use hot water above 40
°
C, benzine, gasoline, thinner, nor other volatile oils,
polishing compound, scrubbing brushes, nor other hand stuff.
•
After cleaning, make sure that the front grille issecurely fixed.
To Next Page
Loading...
Need help?
General