Daikin Super Multi Plus D-Series - Page 262

SiEBE18-526 Service Check Function
Troubleshooting 251
(S2005)
5 Press MODE selector button.
If no button is pressed
for 1 minute, equipment
returns to normal status.
3
Press
MODE
selector
button
When MODE selector
button is pressed or
no button is pressed
for 1 minute,
equipment returns to
normal status.
If no button is pressed
for 1 minute,
equipment returns to
normal status.
Norm
al status
Enters inspection mode from normal
status when the INSPECITON/TEST
button is pressed.
1 Press INSPECTION/TEST button.