46 • Appendix A: GenICam Commands Linea HS Series Camera User's Manual
Select the user defined configuration UserSet 13 as the
Power-up Configuration.
Select the user defined configuration UserSet 14 as the
Power-up Configuration.
Select the user defined configuration UserSet 15 as the
Power-up Configuration.
Select the user defined configuration UserSet 16 as the
Power-up Configuration.
Selects the camera configuration set to load feature settings
from or save current feature settings to. Points to which user
set (1-16) or factory set that is loaded or saved when the
UserSetLoad or UserSetSave command is used. The Factory
set contains default camera feature settings and is read-only.
(RW)
Select the default camera feature settings saved by the
factory
Select the User-defined Configuration space UserSet1 to save
to or load from features settings previously saved by the
user.
Select the User-defined Configuration space UserSet2 to save
to or load from features settings previously saved by the
user.
Select the User-defined Configuration space UserSet3 to save
to or load from features settings previously saved by the
user.
Select the User-defined Configuration space UserSet4 to save
to or load from features settings previously saved by the
user.
Select the User-defined Configuration space UserSet5 to save
to or load from features settings previously saved by the
user.
Select the User-defined Configuration space UserSet6 to save
to or load from features settings previously saved by the
user.
Select the User-defined Configuration space UserSet7 to save
to or load from features settings previously saved by the
user.
Select the User-defined Configuration space UserSet8 to save
to or load from features settings previously saved by the
user.
Select the User-defined Configuration space UserSet9 to save
to or load from features settings previously saved by the
user.
Select the User-defined Configuration space UserSet10 to
save to or load from features settings previously saved by
the user.
Select the User-defined Configuration space UserSet11 to
save to or load from features settings previously saved by
the user.
Select the User-defined Configuration space UserSet12 to
save to or load from features settings previously saved by
the user.
To Next Page
Loading...
Need help?
General