CR805 Retransfer Card Printer Instrallation and Administrator’s Guide A-1
Appendix A: CLM Laminator
This appendix provides information about the optional CLM laminator
that you can add to your system at the time of purchase, or later as a
field upgrade.
About the Laminator System
A laminator system consists of a CR805 card printer and a CLM laminator. The system can print
cards and apply an overlay material on the front and back of the card for increased durability and
security. Using an overlay material with holographic or other transparent images also improves
the security of the card. These materials are tamper evident, making it difficult to reproduce or
modify a card.
Your laminator may look different from the one shown in the illustrations, based
on the options installed. The procedures described in this appendix apply to all
CLM laminators.
Single-Hopper System
Multi-Hopper System
Laminator
Multi-Hopper
Printer
To Next Page
Loading...
