DataCard CR805 - Multi-Hopper System; Electrical Requirements

CR805 Retransfer Card Printer Instrallation and Administrator’s Guide A-5
Multi-Hopper System
Electrical Requirements
The power supply is rated as follows:
System Component
Electrical Requirements
Input Output
Printer 110–240V/50–60 Hz/1.5 Amp 24V/3.0Amp/72W
Laminator with L1 only 100–240V/47–63 Hz/2.2 Amp 24V/3.75Amp/90W
Laminator with L1, L2,
and impresser
100–240V/47–63 Hz/6.6 Amp 24V/6.6Amp/160W
28.8 in
732 mm
23.6 in
598 mm
38.2 in
970 mm
27.6 in
700 mm