DataCard CR805 Installation And Administrator's Guide

CR805 Retransfer Card Printer Installation and Administrator’s Guide 13
Prepare the Multi-Hopper
The multi-hopper ships with the enclosure transition folded down with a restraining pin holding it
in position.
1. Remove the restraining pin from the enclosure transition by pulling it straight up from the
unit.
2. Rotate the enclosure transition 90° so that it aligns with the top of the multi-hopper unit.
Restraining Pin
Enclosure
Transition

DataCard CR805 Specifications

General

Brand	DataCard
Model	CR805
Category	Printer
Language	English