DataCard CR805 - Disable Card Side Printing for Special Card Designs; Use a User-Defined Topcoat Bitmap

CR805 Retransfer Card Printer Installation and Administrator’s Guide 67
FrontPanel Set front panel values for
the printer.
Change Backlight
Brightness,
KeySenseLevel and
SpeakerEnabled
values
Change all Current
Values
Print Select a color mode and set
the supply rewind timeout
period.
No Change all Current
Values
Pick Display and set pick values.
Available to WebService
access level users only.
No No
Transport Set the number of attempts
to eject a card, and display
the transport motor speed.
View only:
TransMedSpeedMM
View only:
TransMedSpeedMM
Change:
EjectFrontRetries
VertTransport Display the speed at which
the vertical transport
motor runs when clearing
errors.
View
VertTransMedSpeed
View
VertTransMedSpeed
Flipper Set the reject tray capacity
and values for the duplex
module in duplex-option
printers. Most settings are
available to WebService
access level users only.
No Change:
RejectHopper
Capacity
BarcodeReader Set the offset values for
positioning a card to be
read by the bar code
reader.
No No
CardStock Set values for each type of
card stock supported by the
printer.
Change all Current
Values
Change all Current
Values
HeatRoller Set the time (in minutes)
the printer is idle before
power to the heated roller
is turned off.
Change all Current
Values
Change all Current
Values
Printer Setting Menu
Option Function WebUser WebAdmin