Datacom DM16E1 - Page 37

DM16E1 / DM4E1 Operation and Installation Manual - 204-4001-19 37
• Firmware Version: Version of the equipment interface management main software.
• Release Date: Release date of the equipment main software (Firmware). If the E14 strap is set to
position B, then the Release Date informed will be the same as that of boot SW.
# -------------------------------------------------------------------------
# DataCom Telematica - DM16E1 Multiplexer
# /local/system
# -------------------------------------------------------------------------
# System Parameters
#
#
# Product Code : 3003
# Resets since factory test : 225
# SW BOOT Version : 7
# Firmware Version : 036
# Release Date : 09/06/07 04:53pm (mm/dd/yy hh:mm)
# HW Version : 6
# E2PROM Version : 4
# MAC Address : [00.04.df.00.aa.87]
# SN : [ 626918]
# ID : [ 0]
#
#
#
# -------------------------------------------------------------------------
# <ENTER> Return and Save <ESC> Return without Saving
# -------------------------------------------------------------------------
• HW Version: Hardware version of equipment.
• E2PROM Version: Equipment E2PROM version. E2PROM is revised every time a new interface
or a new configuration option is added to the existing interfaces.
• MAC Address: MAC address of SNMP Ethernet interface (located on the equipment rear panel).
• SN: Series number of equipment.
• Configurable parameters:
• ID: Identification for user’s use.