Symbology Selection Enter/Exit Programming Mode
Product Reference Guide
187
China Sensible Code Set Length 2
This feature specifies one of the bar code lengths for China Sensible Code Length Control on
page 185. Length 2 is the maximum label length if in Variable Length Mode, or the second fixed
length if in Fixed Length Mode. Charac
ters can be set from 0001 to 7,827 characters in incre-
ments of 0001 (pad with zeroes).
See page 243 for detailed instructions on setting this feature.
Select China Sensible Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at
left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad representing
your desired character(s). End by
scanning the ENTER/
EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
Length 2 is 7,827 Characters
To Next Page
Loading...
