Symbology Selection Enter/Exit Programming Mode
Product Reference Guide
193
Maxicode Set Length 2
This feature specifies one of the bar code lengths for Maxicode Length Control on page 192.
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if
in Fixed Length Mode.
Characters can be set from 0001 to 0145 characters in increments of
0001 (pad with zeroes).
See page 243 for detailed instructions on setting this feature.
Select Maxicode Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at
left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad representing
your desired character(s). End by
scanning the ENTER/
EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
Length 2 is 0145 Characters
To Next Page
Loading...
