Datalogic QuickScan QD24 series - Power off; Powerdown Timeout

Enter/Exit Programming Mode Other BT Features
226 QuickScan™ I QD24XX/QBT24XX/QM24XX
Power Off
See “Power Off” on page 17 for information about this BT feature.
Powerdown Timeout
The Powerdown Timeout feature sets the time for automatically switching the unit off when the
imager has been idle.
$CSLPS00(CR)
Powerdown Timeout = Disable
$CSLPS01(CR)
Powerdown Timeout = 10 minutes
$CSLPS02(CR)
Powerdown Timeout = 20 minutes
R)$CSLPS03(CR
)
Powerdown Timeout = 30 minutes
DEFAULT
DEFAULT
$CSLPS06(CR)
Powerdown Timeout = 60 Minutes (1 Hour)
$CSLPS0C(CR)
Powerdown Timeout = 120 Minutes (2 Hours)