Symbology Selection Enter/Exit Programming Mode
Product Reference Guide
205
Micro QR Code
Set Length 2
This feature specifies one of the bar code lengths for Micro QR Code Length Control on page
203. Length 2 is the maximum label length if in Va
riable Length Mode, or the second fixed
length if in Fixed Length Mode. Charac
ters can be set from 0001 to 0035 characters in incre-
ments of 0001 (pad with zeroes).
See page 243 for detailed instructions on setting this feature.
Select QR Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
t
he entry string. You can then start again at the
beginning.
CANCEL
Length 2 is 0035 Characters
To Next Page
Loading...
