Deep Sea Electronics Plc DSE6120 MKII

Description Of Controls
057-236 ISSUE: 1 Page 46 of 94
Icon Description
Menu Navigation
Used for navigating the instrumentation, event log and configuration screens.
For further details, please see section entitled ‘Operation’ elsewhere in this
manual.
Transfer To Generator
This button is only active in the Manual Mode
and allows the operator to
transfer the load to the generator.
Open Generator (DSE6110 MKII Only)
This button is only active in the Manual Mode
and allows the operator to open
the generator breaker and remove the load.
Transfer To Mains (DSE6120 MKII Only)
This button is only active in the Manual Mode
and allows the operator to
transfer the load to the mains.